en:docs:fapi:viosetstate

This is part of Family API which allow to create dual-os version of program runs under OS/2 and DOS

Note: This is legacy API call. It is recommended to use 32-bit equivalent

2021/09/17 04:47 · prokushev · 0 Comments
2021/08/20 03:18 · prokushev · 0 Comments

VioSetState

This call performs one of the following functions; set palette registers, sets the overscan (border) colour, set the blink/background intensity switch, set color registers, set the underline location, or set the target VioSetMode display configuration.

Syntax

 VioSetState (RequestBlock, VioHandle)

Parameters

  • RequestBlock (PVOID) - input : Address of the video state structures consisting of six different structures depending on the request type:
    • 0 - Set palette registers
    • 1 - Set overscan (border) color
    • 2 - Set blink/background intensity switch
    • 3 - Set color registers
    • 4 - Reserved
    • 5 - Set underline location
    • 6 - Set target VioSetMode display configuration
    • 7 - Reserved

The six structures, depending on request type, are:

Applies to length (USHORT) - input : Length of structure, including length. reqtype (USHORT) - input
VIOPALSTATE EGA, VGA, or IBM Personal System/2 Display Adapter 38 - Maximum valid value Request type 0 for palette registers palette (USHORT) - input: First palette register in the palette register sequence; must be specified in the range 0 through 15. The palette registers are returned in sequential order. The number returned is based upon length.
color (USHORT*(length-6)/2) - input : Color value for each palette register. The maximum number of entries in the color value array is 16
VIOOVERSCANCGA, VGA, or IBM Personal System/2 Display AdapterOnly valid value.Request type 1 for overscan (border) color.Color value.
VIOINTENSITYCGA, EGA, MCGA, VGA, or IBM Personal System/2 Display AdapterOnly valid value.Request type 2 for blink/background intensity switch. switch (USHORT) - input : Switch set as:
0 - Blinking foreground colors enabled.
1 - High intensity background colors enabled.
VIOCOLORREGVGA, or IBM Personal System/2 Display Adapter12 - Only valid value.Request type 3 for color registers. first color (USHORT) - input : First color register to set in the color register sequence; must be specified in the range 0 through 255. The color registers are set in sequential order.
number color (USHORT) - input : Number of color registers to set; must be specified in the range 1 through 256.
datarea (PCH) - input : Far address of a data area containing one three-byte entry for each color register to be set. The format of each entry is as follows:
Byte 1 - Red value
Byte 2 - Green value
Byte 3 - Blue value
VIOSETULINELOCEGA, VGA, or IBM Personal System/2 Display AdapterOnly valid value.Request type 5 to set the scan line for underlining. Underlining is enabled only when the foreground color is 1 or 9. scanline (USHORT) - input : Scan line minus 1. Values of 0 through 31 are acceptable. A value of 32 means underlining is disabled.
VIOSETTARGET Only valid value.Request type 6 to set display configuration to be the target of the next VioSetMode. :select (USHORT) - input : Configuration:
0 - Default selection algorithm. See VioSetMode.
1 - Primary
2 - Secondary
  • VioHandle (HVIO) - input : Reserved word of 0s.

Return Code

;rc (USHORT) - return:Return code descriptions are: *0 NO_ERROR *355 ERROR_VIO_MODE *421 ERROR_VIO_INVALID_PARMS *436 ERROR_VIO_INVALID_HANDLE *438 ERROR_VIO_INVALID_LENGTH *465 ERROR_VIO_DETACHED *494 ERROR_VIO_EXTENDED_SG

Remarks

Family API Considerations

Request type = 6, Set Target VioSetMode Display Configuration, and request type = 5, Set Underline Location, are not supported in the family API.

Some options operate differently in the DOS mode than in the OS/2 mode. Therefore, the following considerations applies to VioSetMode when coding for the DOS mode:

  • VioSetMode clears the screen.

Bindings

C

typedef struct _VIOPALSTATE {
  USHORT  cb;                   /* Length of this structure in bytes */
  USHORT  type;                 /* Request type=0 get palette registers */
  USHORT  iFirst;               /* First palette register to return */
  USHORT  acolor[1];            /* Color value palette register */
  }VIOPALSTATE;
typedef VIOPALSTATE far *PVIOPALSTATE;
 
typedef struct _VIOOVERSCAN {
  USHORT  cb;                   /* Length of this structure */
  USHORT  type;                 /* Request type=1 get overscan
                                    (border) color */
  USHORT  color;                /* Color value */
  }VIOOVERSCAN;
typedef VIOOVERSCAN far *PVIOOVERSCAN;
 
typedef struct _VIOINTENSITY {
  USHORT  cb;                   /* Length of this structure */
  USHORT  type;                 /* Request type=2 get blink/background
                                    intensity switch */
  USHORT  fs;                   /* Value of blink/background switch */
  }VIOINTENSITY;
typedef VIOINTENSITY far *PVIOINTENSITY;
 
typedef struct _VIOCOLORREG {   /* viocreg */
  USHORT  cb;
  USHORT  type;
  USHORT  firstcolorreg;
  USHORT  numcolorregs;
  PCH     colorregaddr;
  }VIOCOLORREG;
typedef VIOCOLORREG far *PVIOCOLORREG;
 
typedef struct _VIOSETULINELOC { /* viouline */
  USHORT  cb;
  USHORT  type;
  USHORT  scanline;
  }VIOSETULINELOC;
typedef VIOSETULINELOC far *PVIOSETULINELOC;
 
typedef struct _VIOSETTARGET {  /* viosett */
  USHORT  cb;
  USHORT  type;
  USHORT  defaultalgorithm;
  }VIOSETTARGET;
typedef VIOSETTARGET far *PVIOSETTARGET;
 
#define INCL_VIO
 
USHORT  rc = VioSetState(RequestBlock, VioHandle);
 
PVOID            RequestBlock;  /* Request block */
HVIO             VioHandle;     /* Video handle */
 
USHORT           rc;            /* return code */

MASM

VIOPALSTATE struc
  viopal_cb               dw ? ;Length of this structure in bytes
  viopal_type             dw ? ;Request type=0 get palette registers
  viopal_iFirst           dw ? ;First palette register to return
  viopal_acolor  dw 1  dup (?) ;Color value palette register
VIOPALSTATE ends
 
VIOOVERSCAN struc
  vioos_cb                dw ? ;Length of this structure
  vioos_type              dw ? ;Request type=1 get overscan (border) color
  vioos_color             dw ? ;Color value
VIOOVERSCAN ends
 
VIOINTENSITY struc
  vioint_cb               dw ? ;Length of this structure
  vioint_type             dw ? ;Request type=2 get blink/background
                              ; intensity switch
  vioint_fs               dw ? ;Value of blink/background switch
VIOINTENSITY ends
 
VIOCOLORREG struc
  viocreg_cb              dw ? ;
  viocreg_type            dw ? ;
  viocreg_firstcolorreg   dw ? ;
  viocreg_numcolorregs    dw ? ;
  viocreg_colorregaddr    dd ? ;
VIOCOLORREG ends
 
VIOSETULINELOC struc
  viouline_cb             dw ? ;
  viouline_type           dw ? ;
  viouline_scanline       dw ? ;
VIOSETULINELOC ends
 
VIOSETTARGET struc
  viosett_cb               dw ? ;
  viosett_type             dw ? ;
  viosett_defaultalgorithm dw ? ;
VIOSETTARGET    ends
 
EXTRN VioSetState:FAR
INCL_VIO            EQU 1
 
PUSH@  OTHER   RequestBlock  ;Request block
PUSH   WORD    VioHandle     ;Video handle
CALL   VioSetState
 
Returns WORD

http://www.edm2.com/index.php/VioSetState_(OS/2_1.x)