KbdPeek

This call returns any available character data record from the keyboard without removing it from the buffer.

KbdPeek (CharData, KbdHandle)

• CharData (PKBDKEYINFO) - output : Address of the character data information:
  • asciicharcode (UCHAR) : ASCII character code. The scan code received from the keyboard is translated to the ASCII character code.
  • scancode (UCHAR) : Code received from the keyboard hardware.
  • status (UCHAR) : State of the keystroke event:

• reserved (UCHAR) : NLS shift status. Reserved, set to zero.
• shiftkeystat (USHORT) : Shift key status.

• time (ULONG) : Time stamp indicating when a key was pressed. It is specified in milliseconds from the time the system was started.
• KbdHandle (HKBD) - input : Default keyboard or the logical keyboard.

rc (USHORT) - return

Return code descriptions are:

• 0 NO_ERROR
• 439 ERROR_KBD_INVALID_HANDLE
• 445 ERROR_KBD_FOCUS_REQUIRED
• 447 ERROR_KBD_KEYBOARD_BUSY
• 464 ERROR_KBD_DETACHED
• 504 ERROR_KBD_EXTENDED_SG

On an enhanced keyboard, the secondary enter key returns the normal character 0DH and a scan code of E0H.

Double-byte character codes (DBCS) require two function calls to obtain the entire code.

If shift report is set with KbdSetStatus the CharData record returned, reflects changed shift information only.

Extended ASCII codes are identified with the status byte, bit 1 on and the ASCII character code being either 00H or E0H. Both conditions must be satisfied for the character to be an extended keystroke. For extended ASCII codes, the scan code byte returned is the second code (extended code). Usually the extended ASCII code is the scan code of the primary key that was pressed.

A thread in the foreground session that repeatedly polls the keyboard with KbdCharIn (with no wait), can prevent all regular priority class threads from executing. If polling must be used and a minimal amount of other processing is being performed, the thread should periodically yield the CPU by issuing a DosSleep call for an interval of at least 5 milliseconds.

Some options operate differently in the DOS mode than in the OS/2 mode. Therefore, the following restrictions apply to KbdPeek when coding for the DOS mode:

• The CharData structure includes everything except the time stamp.
• Interim character is not supported.
• Status can be 0 or 1.
• KbdHandle is ignored.

typedef struct _KBDKEYINFO {   /* kbci */
  UCHAR    chChar;             /* ASCII character code */
  UCHAR    chScan;             /* Scan Code */
  UCHAR    fbStatus;           /* State of the character */
  UCHAR    bNlsShift;          /* Reserved (set to zero) */
  USHORT   fsState;            /* State of the shift keys */
  ULONG    time;               /* Time stamp of keystroke (ms since ipl) */
}KBDKEYINFO;
 
#define INCL_KBD
 
USHORT  rc = KbdPeek(CharData, KbdHandle);
 
PKBDKEYINFO      CharData;      /* Buffer for data */
HKBD             KbdHandle;     /* Keyboard handle */
 
USHORT           rc;            /* return code */

KBDKEYINFO struc
  kbci_chChar    db  ? ;ASCII character code
  kbci_chScan    db  ? ;Scan Code
  kbci_fbStatus  db  ? ;State of the character
  kbci_bNlsShift db  ? ;Reserved (set to zero)
  kbci_fsState   dw  ? ;state of the shift keys
  kbci_time      dd  ? ;time stamp of keystroke (ms since ipl)
KBDKEYINFO ends
 
EXTRN  KbdPeek:FAR
INCL_KBD            EQU 1
 
PUSH@  OTHER   CharData      ;Buffer for data
PUSH   WORD    KbdHandle     ;Keyboard handle
CALL   KbdPeek
 
Returns WORD

Text based on http://www.edm2.com/index.php/KbdPeek_(FAPI)